MIDILLI Configurator is an all-in-one software that lets you customize every parameter of your MIDILLI devices, update their firmware, and more. It is available for Linux, macOS, and Windows.

For first-time use, an internet connection is required to sync and match your hardware with your design. Once synchronized, you can go offline, and work offline.

Choose your operating system to get the executables.

See the license here.

Current version: 1.3.2 – Released: 08.04.2025

Were you just looking for help? Then read the manual here:

Features

Configurator is the only software you need to get the most out of your own MIDI controller. Once you register your device on your MIDILLI account, it will align with your own design. Almost no learning curves because you designed it!

Here is a list of its features:

• Unique interface aligned with your own design(s)
• Change visible name of the components for each bank*
• Real-time view of current functions of the control elements at the current bank
• Change default channel of all components
• Check and update firmware of your controller
• Enable or disable inputs or outputs
• Built-in MIDI Listener to check if the current setup matches your expectations
• Configure buttons for simple MIDI automation
• Change how the MIDI messages are transmitted using MIDI Router
• Filter which messages should be transmitted to which MIDI outputs
• Import or export controller settings

_{*Bank: Depending on the number of control elements on your controller, you can change between different sets of MIDI assignments, allowing each button, knob, or fader to control different functions. Read more about banks here.}

Download

Linux

Note: Only compatible with 64-bit systems. 32-bit is not supported.

How to run?

1. Download the file.
2. Unzip to any folder.
3. Start using: MIDILLI Configurator.desktop or MIDILLIConfigurator.x86_64

Having problems?

Then execute the following on the terminal first:

chmod +x "MIDILLI Configurator.desktop" MIDILLIConfigurator.x86_64

Any further issues or questions?

Check Help & Support section.

macOS

Note: Requires Sierra (10.12) or newer version.

How to run?

1. Download the file.
2. Unzip to any folder.
3. Move MIDILLI.app to the /Applications folder (optional).
4. Double-click MIDILLI.app to launch it.

Having problems?

If you see a security warning (from Gatekeeper), go to System Settings > Privacy & Security, then allow MIDILLI.app to open.

Any further issues or questions?

Check Help & Support section.

Windows

Note: Only compatible with 64-bit systems. 32-bit is not supported.

How to run?

1. Download the file.
2. Unzip to any folder.
3. Launch: MIDILLIConfigurator.exe

Having problems or any questions?

Check Help & Support section.

Version History

• 1.3.2 (08.04.2025):
  • Maintenance release.
• 1.3.1 (31.03.2025):
  • Added: Integration of MIDI Filtering for specific MIDI messages on different MIDI interfaces.
• 1.3.0 (26.03.2025):
  • Added: Sending Clock signal on Buttons.
  • Added: MSB/LSB Converter Utility
  • Added: Advanced settings window for driver latency correction, and RPN, NRPN parameter release.
  • Improved: Disabling non-relevant fields for some types.
  • Fixed: Minor bugs.
• 1.2.0 (24.03.2025):
  • Added: Sending PC (Program Change), NRPN (Non-Registered Parameter Number) and RPN (Registered Parameter Number) on Buttons and Knobs.
  • Added: Repeat intervals in milliseconds (ms) or beats-per-minute (BPM) mode is possible.
• 1.1.1 (08.03.2025):
  • Added: Import and Export Controller settings.
  • Fixed: Minor bugs.
• 1.1.0 (03.03.2025):
  • Added: Integration of Bluetooth functionality.
  • Added: MIDI Message Router utility.
• 1.0.3 (27.02.2025):
  • Added: Selective sending commands.
  • Added: Context menu to change selection in pending commands.
  • Added: Repeating alternate values integrated.
  • Improvement: Better scaling of GUI.
• 1.0.2 (24.02.2025):
  • Added: Automation features integrated.
  • Added: Amnesia mode to ignore initial values of knobs and faders.
  • Added: Additional startup delay for more time on logo and text integrated.
  • Fixed: Minor bugs.
• 1.0.1 (20.02.2025):
  • Fixed: Correct displaying of the visible names.
  • Fixed: Minor bugs.
• 1.0.0 (07.02.2025):
  • Initial version.